SVO / WVO Conversions

Part# SDF500FG

Turbine Series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protect precision engine components from dirt, rust, algae, asphaltines, varnishes, and especially water, which is prevalent in engine fuels. They remove contaminates from fuel using the following three stage process:

Stage 1 - Separation: As fuel enters the filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.

Stage 2 - Coalescing: Small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl.

Stage 3 - Filtration: Water rejecting cartridge elements repel water and remove contaminants from fuel down to two micron (nominal). They are waterproof and effective longer then water absorbing elements.

This Unit take's 2010 elements, SM for 2 Micron, TM for 10 Micron & PM for 30 Micron.

Unit is supplied with 30 micron element fitted and hose fittings.

Features and Benefits:

• Heavy duty construction
• Installs quickly
• Available in 2 and 10 micron
• Easy to service
• Clear collection bowl
• Self-venting water drain

Performance and Dimensions:

• 227 LPH
• Height 292mm
• Width 147mm
• Depth 122mm
• Filter removal clearence 102mm

Optional accessories include:

• water detection kits
• 12 volt dc heaters
• 24 volt dc heaters