With reliability, performance and endurance in mind Paddock Machinery has designed an implement to stand the test of time. Suitable for use on tractors, dozers and Cat I vehicles with PTO output this powered auger will make many farm and construction duties light work. With hydraulic ram assist the digger will handle drier and more impacted soils than standard post hole diggers.
These post hole diggers can be used with a variety of tractors from Kubota to John Deer, Case, Iseki, Massey Ferguson and New Holland to name a few. With a 50HP gearbox this implement is suited to Cat I, three point linkage tractors up to 40HP. An ideal implement for fencing, digging post holes, tree planting, decking and construction. Combine with our range of post hole augers and you'll have the capability to dig deep holes with a neat finish. The implement can be used with or without the hydraulic ram, however, to fully utilise this feature the tractor will require double acting hydraulic remotes to apply down force and retraction.
For more information on matching implements to tractors please see our feature article on PTO Machinery.
PTO tractor implements need to be built tough but with precise engineering. Paddock has over engineered all areas prone to failure. Reinforced booms and arms have been utilised, while the 3PL pins and gearbox linkage are hardened steel. Covers protect the gearbox from dust as well as safety covers on the PTO joints and shaft. As a fail safe, shear pin protection is in built on the PTO shaft to protect the implement and gearbox from damage so you have peace of mind when tackling heavy and hard soils. An optional PTO safety clutch is also available as an addition if you choose. The unit includes hydraulic hoses.
|Three Point Linkage||Cat. I|
|Power||25 - 40 HP Tractors|
|Gearbox Power||50 HP|
|Gearbox Type||Heavy duty, oil filled with tapered bearings.|
|Hydraulic Assist||Single Hydraulic Ram|
|Output Shaft||Standard 2" 50mm Auger Size|
|Auger Size||4" to 18"|
|PTO Speed||Standard 540 RPM|
|Construction||Extra duty boom with reinforced joints and arms|
|PTO Shaft||Included 1-3/8" 6 Spline|
|Includes||Safety covers, PTO shear protection, hydraulic hoses|
|Exclusions||Tractor end pins|
|Dimensions||1770mm (L) x 790mm (W)|
Note: The gearboxes are stored and transported with only enough oil to keep the unit lubricated and additional oil will need to be added before started. For ease of shipping some assembly will be required.
This item can be shipped Australia wide and is also available for pick up from our Brisbane warehouse. This item has a shipping weight of 150kg. We advise contacting us for a freight quote to your location. If a forklift is not available at your location we will need to book a tail lift truck for delivery.