This is a digital engine monitoring system which can easily be retrofitted to any automobile, boat, 4x4, truck or Bus. These units are compact and accept a variety of inputs making them extremely functional for a variety of situations and uses. Custom programmable alarms on high and low set points ensure you never miss an engine warning signal.
This is a early warning system suitable for vehicles or machines. All alarm points and actions are programmable and it can accept a wide range of sensors to read temperatures and pressures on various vehicles and engines.
Now you can monitor your engines operating conditions from a single display unit. Configure alarms associated with set points and even activate relay's to start cooling fans or additional pumps. Popular with performance vehicle owners, custom builds, race trucks, people touring, marine applications, trawlers and everyday boaties, everyone can benefit from these functional display units.
The new EMS-3 unit allows for 7 external & 2 internal Inputs. Each with 4 programmable alarm levels namely High & Low, Caution & Alarm. It also has 2 Outputs and an External Buzzer Connection.
The EMS-3 is designed to fit common 52mm (2") round automotive enclosures. Users can use existing enclosures and mount or cut their own hole directly into machine panels or vehicle dash. The gauge is supplied with a threaded rear nut which is used to secure the display into the mount.
Further information available via the Flyer
|Brand/Model||Madman / EMS-3|
Power Supply 8 to 30 V DC SMPS (Switch mode power supply) with built in 33V over voltage
40mA/10mA @ 13.8V (back light on/off)Voltage reversal and over voltage protection
|Display||Super Bright Colour LCD display. Light sensor with automatic night dimming.|
|Alarms||High, Low and Caution|
|Exhaust Gas Temperature (EGT)||Dedicated input for K-Type thermocouple probes|
Pressure sender Input for either Oil, Fuel, Boost or Aux Pressure. Yes it is possible to connect multiple pressure sensors and display oil pressure at the same time as boost pressure for example.
|Coolant and Oil Temperature||
Coolant or Oil Temperature sender Inputs.
Dedicated input for coolant level detection.
Ability to record all maximum values until reset
The ability to calibrate your own sensors
The ability to set the multi gauge to page through your choice of displays at preset intervals or to display one feature only.
The ability to disable any function/s if they are not required or remain in alarm state.
|Alarm Contact||Alarm Contact - Provides EARTH for relay or LED, Max current = 250mA|
ABS Enclosure / Black
Not recommended for external installation, no IP rating
|Memory||Non-volatile memory storage 100000 write cycles.|
A range of compatible sensors can also be supplied to support these EMS units;