Made in the USA these heavy duty bilge pumps are ideal for a range of applications, not only boat bilges. Suitable for commercial and domestic installations, these are high flow water moving submersible pumps designed to last and outperform the cheaper copies.
Don't underestimate the power of these quality "Made in the USA" bilge pumps. Ideal for installation on your fishing boat, commercial charter yacht or simply for circulating water around your next project build. Operating on 12v DC power (Optional 24v available) they provide extremely reliable pumping operation in a submerged application.
Wetted parts are made of high-impact, non-corrosive thermoplastic; the shaft of stainless steel. Together with a liquid-cooled, 12-pole, double ball-bearing equipped motor, these features ensure safe operation and years of long service.
The motor shaft is sealed off by a lip seal on the L1600. On the L4000 and L2200 there is a mechanical seal that eliminates shaft wear while providing service accessibility at the same time. The impeller design has been carefully tested and optimized to provide reliable flow and maximize head. Because the pumps snap into a universal mounting bracket/inlet screen, they can easily replace most similar bilge pumps.
|Design Flow (GPH)||1600||2200||4000|
|Flow @ 1m head||1550||1900||2600|
|Amperage (12v/24v) amps||7 / 3.5||7.5 / 4.5||15 / 7.5|
|Hose Size||1-1/8"||1-1/8" or 1-1/4"||1-1/2 AND 2"|
|Shaft Seal||Lip Seal||Mechanical Seal|
Ensure your pump turns on and off automatically and reliably, the detector cells in this unit are totally sealed meaning they are never in contact with the water, and therefore will not corrode or be affected by oil or foreign debris. No moving parts, totally sealed solid state electronics and field detectors, no mercury and no exposed sensors eliminate corrosion possibilities. Simple to wire with ultimate reliability in operation. ULTIMA switch is rated to handle pumps up to 20 amps at 12 or 24 volts.