Paddock the best in lawn care equipment! User friendly, walk behind or push style seed and fertiliser spreader. Ideal for dispensing for lawn, home, garden and acreage use. Spread seeds, fertilizers, pellets, grains, sand and more. Designed with simplicity and durability in mind. This is an outdoor product made to be used and stand the test of time. Don't be fooled by low cost imitations.
A quality seed and fertiliser spreader should be in the shed of every home gardener, landscaper and acreage owner. This is versatile lawn and garden accessory capable of dispensing and spreading many types of granules and pellets from seeds to fertilizers and sand. Paddock designs it's spreaders to last, with full UV and weather resistant PP hopper, powder coated frame, puncture resistant tyres and stainless steel fixtures and Nyloc nuts. This is a seeder which will serve you for decades!
The operation is simple and due to the large tires it is easy to push and maneuver so the spreader can be used by people of all physical abilities. To use the spreader simply fill the hopper with grass seeds, fertiliser etc, start pushing the seeder, then using the conveniently located hand controller, open the slots in the bottom of the hopper to allow the seed to flow. By pushing the spreader the wheels will turn the spreader plate or paddle which distributes the seed or fertiliser. Being a conical hopper it will drain to the bottom dispensing all the contents. Mounted to the rear of the spreader are two stand legs so it will self stand when not in use. The gears in the drive come pre greased and require very limited maintenance. The handle height is adjustable so this spreader can be set up for people of all heights. Soft padded grips make the spreader comfortable and safe to operate.
|Accessories||Weather cover (UV resistant vinyl)|
|Broadcast Range||Up to 5m wide distribution|
|Flow Rate||Adjustable (Hand control)|
|Maximum speed||8 km/h|
Pneumatic puncture resistant
12" (4.10/3.50 - 6")
UV resistant polpropylene hopper
Powder coat steel frame with stainless steel fixtures
|Includes||Rain cover included|
Note: Product supplied may vary slightly from the product shown in the video.
Assembly: The seed & fertilizer spreader comes partially assembled. Full assembly instructions are included and allow approximately 30 minutes. A screw driver and 10mm spanner are required.