Skip to content

SHOP ONLINE or CALL 📞 1300 246 406 | MON - FRI 7AM - 5PM

SHOP ONLINE or CALL 📞 1300 246 406 | MON - FRI 7AM - 5PM

Pressure Washer Accessories

A range of pressure washers, cleaners and attachments. Australia's largest online supplier. The Paddock Machinery range of pressure washers are second to none for quality. A favourite among professional cleaners, trade users and hire companies. Pressure cleaners available in hot and cold water variations as well as diesel or Honda petrol engines. Scintex also stocks a range of handy nozzles and accessories from quick coupling nozzles, long range nozzles, turbo heads, surface cleaners, underbody washers, extension wands and more. Paddock pressure washers and accessories rival the best like Karcher, Spitwater, Thoroughclean, Easy Kleen.
Check the accessory’s maximum pressure, required flow rate, connection type and intended use against the pressure washer specifications. Accessories must be rated at or above the machine’s operating pressure and suit its litres-per-minute output. Also confirm whether the connection is M22, quick-connect, threaded or proprietary, as similar-looking fittings may not interchange safely.
Yes. A nozzle with an orifice that is too small can cause excessive system pressure, while one that is too large can reduce cleaning performance. Underrated hoses, reels, guns or fittings may fail under pressure. Only use accessories designed for the machine’s pressure and flow, and never modify safety valves or bypass controls to compensate for a mismatch.
A turbo nozzle provides concentrated rotating impact for stubborn concrete and masonry cleaning, while a surface cleaner gives faster, more even results on large flat areas. A foam cannon applies detergent as clinging foam for vehicles and equipment. Each accessory must suit the surface, detergent and machine output to avoid damage or poor performance.
Longer or smaller-bore hoses increase friction loss and can reduce pressure and flow at the nozzle, particularly on high-flow machines. Restrictive reels, couplers and swivels add further loss. Use hose of adequate internal diameter and pressure rating, minimise unnecessary joins and choose a reel specifically designed for the machine’s operating pressure and flow.
After use, flush detergent equipment with clean water, inspect hoses and fittings for cuts, leaks, corrosion or damaged threads, and clean blocked nozzle orifices with the correct tool. Lubricate seals and swivels only where specified, protect accessories from frost and replace components immediately if they show bulging, exposed reinforcement or unreliable locking.