12V AdBlue & DEF Transfer Pump – 25L/min
Description
The 12V AdBlue & DEF Transfer Pump is a compact electric diaphragm pump designed for transferring AdBlue, AUS32, DEF and compatible urea solutions. Delivering up to 25L/min, it is ideal for mobile refuelling setups, workshops, depots and equipment installations.
The pump operates from a standard 12V DC power supply and includes heavy-duty power leads with alligator clips for convenient connection to a suitable battery. Supplied hose tail fittings suit common 19mm (3/4") transfer hose.
12V AdBlue & DEF Transfer Pump – 25L/min
This compact 12V transfer pump provides a practical solution for transferring AdBlue, AUS32 and Diesel Exhaust Fluid (DEF) from drums, tanks and other compatible storage systems.
The diaphragm pump design keeps the pumped fluid separated from key drive components, making it well suited to urea-based solutions while providing a compact and convenient transfer system.
Key Features
- 12V DC operation
- Flow rate up to 25L/min
- 180W electric motor
- Designed for AdBlue, AUS32 and DEF
- Diaphragm pump design
- 19mm (3/4") connections
- Quick-lock style fittings for convenient installation
- Includes 2 × 19mm (3/4") hose tail fittings
- Heavy-duty power leads with alligator clips included
- Suitable for connection to an appropriate 12V battery supply
- IP55 rated
- 30-minute stated duty cycle
- Compact design suitable for mobile or fixed installations
- Compatible with a range of AdBlue transfer accessories
- 12-month warranty
AdBlue, AUS32 & DEF Transfer
The pump is designed for use with urea-based diesel exhaust fluids including:
- AdBlue
- AUS32
- Diesel Exhaust Fluid (DEF)
- Compatible urea solutions
Its compact design makes it suitable for transferring fluid from compatible tanks and drums into vehicles, machinery and equipment.
12V DC Operation
Heavy-duty power leads with alligator clips are included, allowing the pump to be connected to a suitable 12V battery supply.
The pump can also be incorporated into a suitable fixed 12V installation where required. Any permanent electrical installation should include appropriate wiring, switching and circuit protection for the application.
Quick-Lock Connections
The pump uses quick-lock style fittings designed to provide a convenient liquid-tight connection without requiring thread tape at the quick-lock connection.
Included are 2 × 19mm (3/4") hose tail fittings to suit 19mm transfer hose, making it straightforward to incorporate the pump into an AdBlue transfer system.
Build a Complete AdBlue Transfer System
The pump can be combined with compatible Scintex AdBlue transfer accessories to create a complete dispensing setup, including:
- EPDM AdBlue hose
- Suction hose
- Suction strainers
- AdBlue flow meters
- Manual dispensing nozzles
- Automatic dispensing nozzles
Specifications
| Specification | Value |
|---|---|
| Voltage | 12V DC |
| Power | 180W |
| Flow Rate | 25L/min |
| Inlet / Outlet | 19mm (3/4") BSP male threaded |
| Included Fittings | 2 × 19mm (3/4") hose tail fittings |
| Fluid Compatibility | AdBlue, AUS32, DEF and compatible urea solutions |
| Operating Temperature | -10°C to 60°C |
| IP Rating | IP55 |
| Duty Cycle | 30 minutes |
| Warranty | 12 months |
Typical Applications
- AdBlue transfer from drums and tanks
- Vehicle and machinery DEF filling
- Workshop AdBlue dispensing systems
- Mobile service vehicles
- Farm and agricultural equipment
- Transport depots and fleet maintenance
- Custom AdBlue transfer systems
Important Operating Information
Use only with fluids compatible with the pump and associated hoses, fittings and dispensing equipment. Avoid contamination of AdBlue and DEF during storage and transfer.
Observe the stated 30-minute duty cycle and ensure the pump is connected to a suitable 12V DC electrical supply with appropriate circuit protection.
This pump is intended for compatible AdBlue, AUS32, DEF and urea-solution transfer applications. Do not use with petrol, diesel or other fluids unless compatibility has been specifically confirmed.