Facet Posi-Flo 12V Automotive Fuel Pump #60106 – 4–7 PSI, 32 GPH

Description

The Facet Posi-Flo #60106 12V Fuel Pump is a compact, USA-made electric fuel pump designed for compatible automotive, machinery and fuel-transfer applications. With a stated operating pressure of 4–7 PSI and maximum flow of 32 GPH, it is ideal for compatible low-pressure fuel systems and priming applications.

The solid-state pump is self-priming and self-regulating, with sealed electronics and a compact design that makes installation possible in tight locations.

Facet Posi-Flo #60106 12V Automotive Fuel Pump

Made in the USA, the Facet Posi-Flo is a proven style of compact electric fuel pump suitable for compatible petrol, diesel, biodiesel and blended alcohol fuel applications.

The #60106 operates from a 12V DC supply and delivers up to 32 GPH / approximately 121L/hr with a stated pressure range of 4–7 PSI.

Facet Posi-Flo Features

• 12V DC operation
• 4–7 PSI operating pressure
• Up to 32 GPH / approx. 121L/hr
• Self-priming
• Self-regulating design
• Suitable for compatible priming applications
• Solid-state pump design
• Sealed electronics
• No diaphragm or conventional bearing arrangement
• Minimum stated dry lift of 12" / approx. 300mm
• Approx. 1.6A average current draw
• Internal 3.5A fuse
• 1/8"-27 internal threaded fuel connections
• Negative ring lead
• Compact installation footprint
• Made in the USA
• 12 month warranty

Compatible Fuels

The supplied compatibility information includes:

• Petrol / gasoline
• Diesel
• Biodiesel
• Compatible blended alcohol fuels
• Compatible fuel additives
• Light oils where material compatibility and pump performance are suitable

Always confirm that the pump's materials, 4–7 PSI pressure range and flow capacity are suitable for the specific fuel system before installation.

Low-Pressure Fuel Pump

The Facet #60106 is designed for applications requiring a relatively low fuel delivery pressure.

Typical applications may include:

• Carburettor fuel supply where the required pressure is compatible
• Diesel fuel supply applications
• Fuel priming
• Automotive and machinery fuel systems
• Auxiliary fuel systems
• Compatible generator and engine applications

This is not a high-pressure EFI fuel pump. Check the engine or fuel-system manufacturer's required pressure and flow before installation.

Self-Priming Operation

The pump is self-priming and has a stated minimum dry-lift capability of 12" / approximately 300mm, making it suitable for compatible applications where some suction lift is required.

For best performance, install the pump according to the manufacturer's mounting requirements and minimise unnecessary suction-line length, restrictions and air leaks.

Electrical Configuration

The #60106 operates from a 12V DC electrical system and has an average stated current draw of approximately 1.6A. An internal 3.5A fuse is specified.

The supplied configuration has a negative ring lead and no positive lead, so appropriate wiring and electrical protection should be incorporated during installation.

Facet Posi-Flo #60106 Specifications

Important Installation Notes

This pump does not incorporate a check valve or positive fuel shut-off. Consider the requirements of the complete fuel system when determining whether additional valves or controls are required.

Fuel systems must be installed using compatible fuel hose, fittings, electrical components and appropriate circuit protection. Keep wiring and fuel lines protected from exhaust heat, sharp edges and moving components.

Before purchasing, confirm that the required fuel pressure and flow of the engine or equipment fall within the pump's specified operating range.