Paddock Quad Bike & ATV Weed Sprayer
Description
The Paddock Quad Bike & ATV Weed Sprayer is a versatile 12V spraying system designed for weed control, property maintenance and agricultural spraying. Available with a 50L or 100L tank, each sprayer includes a heavy-duty boom, adjustable spray lance and on-demand diaphragm pump for both broad-area and spot spraying.
Mount the tank directly to your quad bike, ATV, ride-on mower or utility vehicle, or add the optional tow-behind trailer for an easy-to-connect mobile spraying setup. With a boom spray width of approximately 2.2m and a hand lance with 6m of hose, the Paddock sprayer is ready to tackle everything from paddocks and fence lines to individual weeds and hard-to-reach areas.
- Available with 50L or 100L tank
- 12V on-demand diaphragm pump
- Flow rate up to 6L/min
- Operating pressure of 30–60 PSI
- 1,200mm heavy-duty spray boom included
- Approximately 2,200mm boom spray width
- 4 individually controlled fan-spray nozzles
- Adjustable hand spray lance included
- 6m spray lance hose for spot spraying away from the vehicle
- Heavy-duty UV-stabilised tank
- 2 ratchet tie-down straps included
- Optional tow-behind trailer
- 12 month warranty
Paddock Quad Bike & ATV Weed Sprayer
50L & 100L 12V Boom Sprayers
The Paddock ATV Sprayer provides a practical mobile spraying solution for farms, acreage, gardens and larger properties. The combination of a rear spray boom and handheld lance means one unit can be used for both broad-area spraying and targeted spot applications.
Mount the tank to a compatible ATV, quad bike, ride-on mower or utility vehicle and use the boom while travelling across larger areas. When more targeted spraying is required, switch to the handheld lance and use the generous 6m hose to reach fence lines, scrub, garden areas and individual problem weeds.
Heavy-Duty Spray Boom Included
Unlike sprayers where the boom is an additional accessory, the Paddock kit includes a heavy-duty 1,200mm spray boom as standard.
The boom uses 4 fan-pattern spray nozzles to provide an approximate total spray width of 2,200mm, allowing larger paddocks and lawn areas to be treated efficiently.
Individual nozzles can be switched on or off, giving the operator greater control over the effective spray pattern when working around boundaries, fence lines and other areas where a full-width spray may not be required.
Adjustable Hand Spray Lance
For targeted applications, the sprayer includes a handheld spray lance with 6m of hose. The adjustable nozzle can be changed between a finer spray pattern and a more concentrated jet to suit different applications.
The long hose also allows the operator to leave the vehicle and reach areas that may be difficult or unsuitable to access with the ATV itself.
12V On-Demand Diaphragm Pump
The sprayer uses a 12V diaphragm pump with an integrated pressure switch. Capable of delivering up to 6L/min at 30–60 PSI, the pump is matched to both boom spraying and handheld lance applications.
The on-demand pressure switch automatically controls pump operation according to flow demand, so the pump does not need to run continuously when spraying has stopped.
Power cables with alligator clips are included for connection to a suitable 12V battery.
50L or 100L UV-Stabilised Tank
Choose between 50L and 100L tank capacities depending on the size of your property and spraying requirements.
The moulded tanks are manufactured from UV-stabilised material for outdoor use and feature a seamless construction. Measuring increments help the operator monitor tank contents and assist when preparing solutions according to the chemical manufacturer's instructions.
Each tank also includes a large inspection/fill opening, drainage port and suction strainer.
Simple ATV & Quad Bike Mounting
Two ratchet tie-down straps are included for securing the sprayer to a suitable rear rack or mounting platform. This makes the sprayer easy to install and remove when required.
Before use, always confirm the filled weight of the selected sprayer is within the load capacity of your ATV, quad bike or other vehicle and that the tank is securely restrained.
Optional Tow-Behind Trailer
Don't have suitable space on the rear of your vehicle? An optional tow-behind trailer is available and is designed to accommodate either the 50L or 100L sprayer.
The trailer allows the sprayer to be quickly connected to a compatible ride-on mower, quad bike or ATV using a tow-behind configuration.
The maximum specified towing speed with the optional trailer is 12km/h.
See the Paddock ATV Sprayer in Action
Ideal Applications
Subject to the directions and approved uses of the chemical being applied, the Paddock ATV Sprayer is ideal for a wide range of property maintenance and agricultural spraying applications, including:
- Weed spraying
- Paddock maintenance
- Fence lines and boundaries
- Spot spraying
- Pastures and acreage
- Gardens and landscaping
- Fertiliser applications
- Agricultural and property maintenance
Sprayer Specifications
| Specification | Details |
|---|---|
| Tank Capacity | 50L or 100L with measuring increments |
| Pump Type | 12V diaphragm pump with integrated pressure switch |
| Maximum Flow Rate | Up to 6L/min |
| Operating Pressure | 30–60 PSI |
| Pump Power | Approximately 6A / 72W |
| Power Connection | 12V power cable with alligator clips |
| Spray Lance | Included with adjustable spray pattern |
| Spray Lance Hose | 6m |
| Boom | 1,200mm heavy-duty boom |
| Boom Nozzles | 4 × fan-pattern nozzles with individual shut-off |
| Approx. Boom Spray Width | 2,200mm |
| 50L Tank Dimensions | 800 × 375 × 365mm (L × W × H) |
| 100L Tank Dimensions | 920 × 460 × 485mm (L × W × H) |
| Tie Downs | 2 × ratchet tie-down straps included |
| Additional Tank Features | Drainage port, large inspection/fill opening and suction strainer |
| Optional Trailer | Steel construction, suitable for 50L or 100L sprayer |
| Maximum Trailer Tow Speed | 12km/h |
| Manufacturer | Paddock Machinery |
| Warranty | 12 months |
Assembly & Installation
The sprayer requires minor assembly, including fitting the spray boom. Two ratchet straps are supplied for mounting the tank to a suitable vehicle rack or platform.
Before filling the tank, ensure the sprayer is correctly assembled, securely mounted and connected to an appropriate 12V power source.
Important: Only use spray products compatible with the sprayer and approved for the intended application. Always follow the chemical manufacturer's label, mixing instructions, personal protective equipment requirements and application directions. Confirm your vehicle's rack and payload capacities before mounting a filled sprayer.