Paddock™ Honda Petrol Concrete Saws – 14" & 20" Walk-Behind

Description

Paddock™ walk-behind concrete saws combine heavy-duty construction with genuine Honda 4-stroke petrol engines for professional concrete cutting applications. Available in 14" and 20" models, these floor and road saws provide cutting depths up to 90mm and 170mm respectively, with integrated water tanks for wet cutting and blade cooling.

Paddock™ Honda Petrol Walk-Behind Concrete Saws

Designed for cutting concrete slabs, footpaths, driveways and other suitable hard surfaces, Paddock™ walk-behind concrete saws provide a stable platform for controlled cutting on construction and civil worksites.

Two models are available. The compact SCC0350 uses a Honda GX200 engine and accommodates blades up to 350mm (14"), while the larger SCC0501 uses a Honda GX390 engine and accommodates blades up to 500mm (20").

Concrete Saw Features

• Genuine Honda commercial 4-stroke petrol engines
• Heavy-duty rigid steel frame construction
• Walk-behind design for controlled concrete cutting
• Adjustable cutting depth
• Integrated cutting guide
• Integrated polyethylene water tank
• Water delivery to both sides of the cutting blade
• Easy-access blade guard for blade changes
• Heavy-duty drive and bearing assemblies
• Cutting blade included
• 2 year warranty

14" SCC0350 Concrete Saw

The SCC0350 is the smaller and lighter model in the range, powered by a genuine Honda GX200 196cc petrol engine. It accepts blades from 250mm (10") to 350mm (14") diameter and provides a maximum cutting depth of 90mm.

At approximately 52kg, the SCC0350 is manually propelled by the operator and incorporates a cutting guide, crank-adjustable cutting depth and 16L water tank.

20" SCC0501 Concrete Saw

For larger cutting applications, the SCC0501 is powered by a genuine Honda GX390 389cc petrol engine. It accepts blades from 350mm (14") through to 500mm (20") diameter and provides a maximum cutting depth of 170mm.

The larger machine features semi-self-propelled operation, a cutting guide wheel, heavy-duty rigid frame and high-capacity 46L polyethylene water tank.

Integrated Water Supply

Both models incorporate an onboard water tank to supply water to the cutting area. Dual water outlets distribute water to both sides of the blade, assisting with blade cooling and dust suppression during suitable wet-cutting applications.

Always ensure adequate water flow is maintained when using blades designed for wet cutting.

Rigid Walk-Behind Design

The heavy-duty steel frame provides a stable platform for the engine, blade assembly and operator controls. The walk-behind configuration and integrated cutting guide assist the operator in maintaining a controlled cutting path.

Cutting depth can be adjusted to suit the application, while the accessible blade guard simplifies routine blade inspection and replacement.

Typical Applications

• Concrete slabs
• Footpaths and walkways
• Driveways
• Road and civil works
• Kerbs and gutters
• Construction sites
• Concrete contracting
• Building and infrastructure projects

Paddock™ Concrete Saw Specifications

Blade Selection

Select a diamond blade suitable for the material being cut, the saw's blade diameter range and the intended wet-cutting application. Never exceed the blade manufacturer's maximum rated RPM or the saw's specified blade capacity.

Note: A cutting blade is supplied with the saw. Spare and replacement cutting blades are also available separately.

Before First Use

These engines may be transported with only sufficient oil for storage and transport. Check the engine oil level and add the correct oil as required before starting. Some basic assembly may also be required following delivery.

Always follow the supplied operating instructions and appropriate site safety procedures when cutting concrete. Suitable personal protective equipment should be worn, and the work area should be assessed for embedded services before cutting.