Use these filter housings with almost any fluid, diesel, biodiesel, oils, unleaded petrol, methanol, coolant and water. Various sizes available. They take filter bags which have a large surface area meaning they can filter a large amount of particulate, thus reducing the need to change bags or filter elements often. These filters can be used with any micron filter bag and we can supply filter socks from 1 micron up to 500 micron.
The Scintex range of stainless steel filter bag housings are available to suit O1, O2, O3 and O4 size filter bags. They feature a simple top lid design and are supplied with a filter bag support insert or basket. The top of each housing has a threaded BSP port where a pressure gauge or air bleed valve can be fitted. If these are not required it can be plugged with a 1/4" BSP plug fitting. Designed for the liquid to enter via the top side inlet and exit at the bottom, these housings will provide a cost effective unit, making messy filtering jobs simple.
|Specification||Size O1||Size O2||Size O3||Size O4|
|Size||7" x 17"||7" x 32"||4" x 8"||4" x 14"|
|Bag Area (sq.ft)||2.6||5.0||0.8||1.5|
|Flow Rates (L/hr)||20,000||40,000||6,000||12,000|
|Material||304 SS||304 SS||304 SS||304 SS|
|Lid Type||Clamp Ring||Clamp Ring||Clamp Ring||Clamp Ring|
|Filter Bag Size||7" x 17"||7" x 32"||4" x 8"||4" x 14"|
|Inlet / Outlet||2" BSP Female||2" BSP Female||1" BSP Female||1" BSP Female|
|Top Vent||1/4" BSP Female||1/4" BSP Female||1/4" BSP Female||1/4" BSP Female|
|Max Pressure||100 PSIG||100 PSIG||100 PSIG||100 PSIG|
|Model||A (mm)||B (mm)||C (mm)||D (mm)||F (mm)||In/Outlet|
The filter housings in this range have adjustable leg heights. This allows fittings to be added to the outlet at the bottom of the housing. Simple loosen the bolts on the legs and slide the filter housing to the desired height. The legs also have feet with a mounting hole for permanent mounting of the filter.
See our FAQS page on filters and filter bags.