Skip to content
Order online or call 1300 246 406
Order online or call 1300 246 406

3 Port Fuel Selector Valve

$197.00
(inc GST)
SKU SFV12VSVO-1/4

Notify me when back in stock

FREIGHT ESTIMATE: Add to cart for shipping costs.

 

Description

Use to switch or change over fuel lines. One 3 port valve will do either supply or return fuel lines. To replicate a Pollak 6 port valve you will require 2x 3 Port valves.

Three Port Fuel Tank Selector Valve

Available in 12V or 24V versions

A quality replacement for the common 6 Port Pollak Fuel Valves. Machined from high strength aluminium. Ideal for offroad, 4x4 environments as well as marine and boating applications. These 3-port valves contain Viton seals making them compatible for use with diesel, biodiesel, oils, straight vegetable oils, SVO & WVO as well as petrol or unleaded fuels. Two valves are required to replace your standard Pollak 6 Port Fuel Valve. If your application requires just turning the flow on and off from a tank this can be done by putting a 1/2" plug in Port 3.

Fittings: The valves are supplied with 3 barbed elbow fittings which are simple to fit to existing fuel hoses. These can be supplied to suit hose of 1/4", 5/16", 3/8", 1/2" or 5/8". Please use the drop down menu above to let us know which fittings you require. We can also supply other fitting sizes on request.

Operation & Install Guide

Note:Once the power is disconnected to the valve the ports revert to default Port 1 & 2 open.

Specification Value
Voltage 12V DC or 24V DC
Seals Viton
Fittings (Included)

1/4", 5/16", 3/8", 1/2" or 5/8" Elbow barb

Note: 1/2" tail option is supplied as a straight tail fitting only.

Ports 1, 2 & 3  1/2" NPT
Orifice 12mm
Operating Pressure 0-10 Bar
Operating Temperature -40 to 100C
Construction Aluminium
Electrical LED illuminates on energisation
Warranty 12 Months

For dual fuel tanks and dual fuel systems we can also supply the Pollak 6 Port Motorised Valve.

NOTE: Some fitting options only available in brass.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
ROBERT STEPHENS
Good product

Only problem was the description of which port was the common one. Going by your picture of the valve hard to determine which was the right one. No port had the number stamped on each one.

L
Les T.
Review

I used two of these valves instead of the Pollak valve because of the threaded ports. As the Pollak valves are moulded barbs the 3 port allowed me to fit 1/2" return lines. The wiring is simple, no tricks and they just require 12Volts and a simple switch to activate. The current draw is low so you can easily run two off a single auto switch.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
ROBERT STEPHENS
Good product

Only problem was the description of which port was the common one. Going by your picture of the valve hard to determine which was the right one. No port had the number stamped on each one.

L
Les T.
Review

I used two of these valves instead of the Pollak valve because of the threaded ports. As the Pollak valves are moulded barbs the 3 port allowed me to fit 1/2" return lines. The wiring is simple, no tricks and they just require 12Volts and a simple switch to activate. The current draw is low so you can easily run two off a single auto switch.