A bare heating element available in 2 power sizes. Great for DIY or custom heating projects. The drum fitting makes it simple to install. Incorporates a dip tube for temperature probes.
These heating elements are specifically designed with a low heat density. This means while the output of the heater element is still 800W the surface of the element does not get as hot as other elements. This helps prevent degradation of the fluid being heated. Having a low heat density makes these heaters ideal for heating biodiesel and vegetable oils which require a low heat density to prevent chemical degradation which leads to high levels of free fatty acids. Customers have used these heating elements for a variety of applications such as heating waxes and heavy oils, bee's wax, engine oils, fats and a variety of other non flammable substances. All Immersion Heaters are supplied with 2" BSP fitting ideal for screwing into 44 gallon drums. If trying to fit to another vessel it's possible to weld or thread on a 2" nut to screw the element into.
|Heater Element Specifications||800W||2400W|
|Voltage||240V 50HZ||240V 50HZ|
|Active Length||Bottom 400mm||Bottom 425mm|
|Fitting||2" BSP||2" BSP|
*Heaters are supplied as the bare element only.