A sealed, in line heater where fluid is circulated past the element and heated. An inbuilt thermocouple feeds back to the digital thermostat to control the temperature to your preset level.
This high quality construction in line heater has a variety of applications such as heating oils, biodiesel production, furnace preheaters, heating aquariums and water. Scintex can also customise these units to your requirements. Modifications include varying the inlet and outlet hose ends so your own hosing will plumb directly to the inline heater. Insulation can also be provided if high efficiency heating is required. The elements used are low heat density and thus have a lower surface temperature, so they tend not to degrade the liquid they are in contact with.
The inline heaters are supplied with the option of 1/2", 3/4" or 1" stainless steel hose tails. Make your selection using the drop down box above. These fittings easily allow hoses to be attached to the heater. However, we can customise the fittings to suit your requirements but this is an additional cost. For customised fittings options contact us and we'll provide details and pricing.
|In Line Heater Specifications||Heater|
240V Single phase, 2400W
Can be configered as 800w/1600w/2400w
|Heat Density||31kw/m2 (20 w/in2)|
|Rate||approx. 85L/hr heating oil to 80C|
|Inlet Size||Preference to be advised by the customer|
|Outlet Size||Preference to be advised by the customer|
Insulation by request
Note: Heaters are supplied as a kit requiring minimal assembly with instructions provided. You are required to have an electrician complete wiring. Images might vary slightly depending on customer requirements.