Paddock Walk Behind Spreader 125Lb

Description

The Paddock Walk Behind Seed & Fertiliser Spreader 125Lb is a heavy duty broadcast spreader designed for lawns, gardens, acreages and landscaping applications. With a large 56kg / 125lb capacity, stainless steel frame and gear drive, oversized pneumatic tyres and adjustable broadcast controls, it is built for regular outdoor use across a wide range of granular products.

This model is an upgraded alternative to the smaller Paddock walk-behind spreaders, offering greater capacity, larger tyres and more corrosion-resistant construction for users who need to cover larger areas efficiently.

Paddock Walk Behind Seed & Fertiliser Spreader 125Lb

• 56kg / 125lb carrying capacity
• 60L hopper volume
• Broadcast width up to 5m
• Suitable for seed, fertiliser, lime, gypsum, sand and compatible pellets
• Stainless steel frame and gear drive
• UV-resistant polypropylene hopper
• Large 14" x 6" pneumatic tyres
• Adjustable flow rate
• Front, rear and side spread control flaps
• Rain cover included
• Adjustable handle height
• Self-standing rear support legs
• Low maintenance design
• 12 month warranty

Heavy Duty Broadcast Spreader for Lawns & Acreages

A quality broadcast spreader can make fertilising, seeding and soil treatment far faster and more consistent than spreading by hand.

The Paddock 125Lb spreader is suited to a wide range of users including:

• Home gardeners
• Landscapers
• Acreage owners
• Property maintenance contractors
• Golf courses
• Parks and recreation areas
• Small farms
• Equine and livestock properties

Suitable for a Wide Range of Granular Products

The spreader can be used with many free-flowing granular products including:

• Grass seed
• Lawn seed
• Fertiliser
• Lime
• Gypsum
• Fine sand
• Compatible pellets
• Grains and other suitable granules

Always ensure the material is sufficiently dry and free flowing for reliable broadcast operation.

Upgraded 56kg / 125Lb Capacity

The SWBS125 features a larger hopper than the smaller Paddock walk-behind spreader models.

The 56kg / 125lb rated capacity and 60L hopper volume allow larger areas to be treated between refills, improving productivity when working on acreage, large lawns or commercial properties.

Stainless Steel Frame & Gear Drive

A major upgrade on this model is the use of stainless steel for the frame, gear drive and key fixtures.

This makes the spreader particularly well suited to fertiliser and other granular products which can be corrosive to ordinary painted steel components.

Combined with the UV-resistant polypropylene hopper and stainless fixtures, the construction is designed for long-term outdoor use.

Large Pneumatic Tyres

The spreader uses oversized 14" diameter x 6" wide pneumatic tyres.

The larger footprint helps:

• Improve stability
• Reduce ground compaction
• Roll more easily over rough lawns and paddocks
• Reduce the chance of dropping into small holes and divots
• Reduce vibration and shaking over uneven terrain

This makes the SWBS125 particularly suitable for acreage and larger property applications where the ground may not be perfectly smooth.

Adjustable Broadcast Width & Flow

The spreader's output is controlled from the operator position using the convenient hand control.

As the spreader is pushed forward, the wheels drive the internal gear system and rotating broadcast plate. Material flows from the bottom of the hopper onto the spinning plate and is distributed across the ground.

Flow rate can be adjusted depending on the material being spread and the desired application rate.

Adjustable Front, Rear & Side Flaps

The adjustable flaps allow the operator to better control where material is broadcast.

This is particularly useful when working:

• Along garden edges
• Beside pathways
• Near fences
• Around buildings
• In areas where overspread needs to be minimised

Up to 5m Broadcast Width

Depending on the material, flow setting and walking speed, the spreader can achieve a broadcast width of up to approximately 5 metres.

A wider distribution pattern allows large areas to be covered quickly and helps reduce the number of passes required.

Simple Push Operation

Operation is straightforward:

• Fill the hopper with suitable seed, fertiliser or other granular product
• Begin pushing the spreader forward
• Open the flow control from the handle
• The wheels drive the broadcast plate
• Adjust the flow and distribution pattern as required
• Close the flow control before stopping or turning

The conical hopper helps direct material towards the outlet to minimise product remaining in the bottom of the hopper.

Comfortable Adjustable Handle

The handle height can be adjusted to suit different operators.

Soft padded grips help improve comfort during longer spreading jobs, while the large wheels reduce the effort required to move the unit across uneven terrain.

Self-Standing Design

Rear support legs allow the spreader to stand upright when parked or being filled.

This provides a stable loading position and makes storage more convenient when the unit is not in use.

Rain Cover Included

A UV-resistant weather cover is supplied with the spreader.

The cover helps protect fertiliser, seed and other moisture-sensitive materials from light rain and damp conditions during operation.

Low Maintenance Drive System

The gear drive is supplied pre-greased and requires relatively little routine maintenance.

As with any spreader used with fertilisers and salts, cleaning the machine after use will help extend its service life.

Pay particular attention to removing residual product from the hopper, spread plate and moving components before storage.

Paddock 125Lb Walk Behind Spreader Specifications

Assembly

The seed and fertiliser spreader is supplied partially assembled to reduce shipping size.

Allow approximately 30 minutes for assembly. Full assembly instructions are included.

Basic tools including a screwdriver and spanner are required.

Care After Use

Fertilisers, salts and other granular products can attract moisture and become corrosive if left on machinery.

For best service life:

• Empty unused product after operation
• Clean the hopper and broadcast plate
• Remove fertiliser residue from the frame and drive system
• Allow the spreader to dry before storage
• Inspect moving components periodically
• Store under cover where practical