Skip to content

SHOP ONLINE or CALL 📞 1300 246 406 | MON - FRI 7AM - 5PM

SHOP ONLINE or CALL 📞 1300 246 406 | MON - FRI 7AM - 5PM

PTO Chipper Spares

Spare and consumable parts to suit the Paddock PTO Chipper PHDPTOCHIP.
Confirm the exact chipper model, PTO speed, serial or revision information and the component shown in the parts diagram. Compare blade dimensions, hole spacing, belt size, bearing numbers, pulley details and mounting hardware. PTO chippers can vary between production runs, so do not assume a generic blade or bearing will fit.
Chipper blades or knives, anvils, belts, bearings, shear bolts, feed rollers and hydraulic hoses are common service items. Wear depends on timber hardness, contamination and feed technique. Dirt, stones, nails and wire rapidly damage cutting components and can create dangerous imbalance or shock loading through the rotor and driveline.
Service blades when feed performance declines, chips become stringy, power demand rises or cutting edges are chipped and rounded. Maintain the specified edge angle and blade-to-anvil clearance. Replace cracked, bent or excessively worn components and keep matched blades at equal weight to preserve rotor balance and protect bearings.
Disengage the PTO, stop the tractor, remove the key and wait for all movement to cease before inspection. Check blades, anvils, rotor, belts, shear protection, bearings, guards and feed components for impact damage or looseness. Do not restart until the obstruction is removed and any bent, cracked or displaced parts are repaired.
Keep blades sharp, maintain anvil clearance, grease bearings and feed mechanisms as specified and operate only at the correct PTO speed. Feed clean timber of suitable diameter without forcing it, and avoid soil-contaminated roots or demolition waste. Regularly inspect belt tension, fasteners, guards and driveline components before use.