240V Drum Pump – 90L/min Barrel & Diesel Transfer Pump
Description
This 240V drum pump provides fast, convenient fluid transfer from drums and barrels at flow rates up to 90L/min. Supplied with a 1m suction tube, the pump is suitable for diesel, kerosene, water and compatible chemicals, making it ideal for workshops, farms, industrial sites and fluid transfer applications.
240V Drum & Barrel Transfer Pump – 90L/min
A high-flow electric drum pump designed for transferring fluids directly from drums, barrels and suitable containers. Powered by standard 240V single-phase power, this pump offers a convenient solution for transferring diesel, kerosene, water, fertilisers and compatible chemicals.
Important: This pump is not suitable for unleaded petrol, gasoline or other flammable fluids. Always confirm chemical compatibility with the pump's wetted materials before use.
240V Drum Pump Features
- High flow rate up to 90L/min
- Self-priming operation
- 240V single-phase electric motor
- 1,000mm suction tube for drums and barrels
- Capable of emptying a 200L drum in approximately 2–3 minutes under suitable conditions
- Continuous duty operation
- Suitable for stop-start applications
- Thermal overload protection
- Anti-corrosion finish
- Low-noise operation
- Supplied with 1" hose barb outlet fitting
Drum Pump Applications
The combination of a long suction tube and high flow rate makes this pump suitable for a wide variety of commercial, agricultural and industrial fluid-transfer applications. It can be used for refuelling compatible diesel-powered machinery, tractors and equipment, as well as transferring water, fertilisers and compatible chemicals from drums and barrels.
The continuous-duty motor makes the pump suitable for applications requiring longer operating periods, while its stop-start capability provides flexibility for intermittent transfer jobs.
Construction & Fluid Compatibility
The pump incorporates a polypropylene body, 304 stainless steel shaft, PTFE slide bearing and FKM O-ring seals. These materials provide compatibility with a broad range of fluids; however, users should always check the compatibility of the specific fluid being transferred with the pump's wetted materials before operation.
Suitable fluids include diesel, kerosene, water and compatible chemicals within the specified viscosity and temperature limits.
Do not use this pump with unleaded petrol, gasoline or other flammable fluids.
240V Drum Pump Specifications
| Specification | 240V Drum Barrel Pump |
|---|---|
| Voltage | 240V Single Phase |
| Power | 450W |
| Flow Rate | Up to 90L/min |
| Tube Outlet | 1 1/4" BSP male thread with 1" hose barb supplied |
| Rotation | 3,000–11,000 RPM under load |
| Suction Lift / Tube Length | 1,000mm |
| Duty Cycle | Continuous |
| Operating Temperature | -20°C to 60°C |
| Fluid Viscosity | 0–200 CPS |
| Construction | Polypropylene body, 304 stainless steel shaft, PTFE slide bearing and FKM O-ring seals |
| Weight | 4.7kg |
| Features | Thermal overload protection and low-noise operation |
| Warranty | 12 Months |
Note: Actual flow rate will vary depending on the fluid viscosity, transfer conditions, hose configuration and discharge restrictions. Always verify fluid compatibility with the pump's wetted materials before use.