Paddock™ Inline Pressure Washer Water Filter – 40 Micron
Description
Protect your pressure washer pump from dirt, rust and other debris in the incoming water supply with the Paddock™ Inline Pressure Washer Water Filter. Featuring a reusable 40 micron stainless steel mesh element and clear inspection bowl, this compact filter provides an additional level of filtration before water enters the pump.
With standard 3/4" BSP connections, the filter is suitable for installation between a compatible water supply and pressure washer inlet.
Paddock™ Inline Pressure Washer Water Filter – 40 Micron
Clean inlet water is important for reliable pressure washer operation. Dirt, rust and other particles entering the high-pressure pump can contribute to premature wear, blockages and damage to internal pump components.
This inline filter provides a simple way to filter the incoming water supply before it reaches the pressure washer.
Key Features
- 40 micron filtration
- Reusable stainless steel mesh filter element
- Washable and easy to clean
- Clear filter bowl for quick visual inspection
- Large filtration area in a compact housing
- 3/4" BSP inlet and outlet connections
- Maximum water temperature: 60°C
- Suitable for pressure washer inlet filtration
- Helps capture dirt, rust and other particulate contamination
40 Micron Stainless Steel Mesh
The filter uses a 40 micron reusable stainless steel mesh element to capture particulate contamination before it reaches the pressure washer pump.
The stainless steel element can be removed, washed and reused, providing an economical alternative to disposable filter cartridges for suitable applications.
Clear Inspection Bowl
The transparent filter bowl allows the condition of the filter element to be checked without dismantling the housing.
Regular visual inspection makes it easier to identify accumulated debris and clean the element before excessive contamination begins to restrict water flow.
Pressure Washer Pump Protection
High-pressure piston pumps rely on an adequate supply of clean water. Contaminants such as rust, dirt and other particles can cause wear or damage if allowed to enter the pump.
An inline inlet filter provides additional protection where the water supply may contain particulate contamination, including some tank, bore, farm and older plumbing systems.
The filter may also be used as an additional filtration stage where the pressure washer already incorporates a smaller inlet screen.
Specifications
| Specification | SPWGHFF |
|---|---|
| Filter Element | Reusable stainless steel mesh |
| Filtration | 40 micron |
| Maximum Water Temperature | 60°C |
| Inlet | 3/4" BSP |
| Outlet | 3/4" BSP |
| Dimensions | 93 x 70 x 140mm |
Installation & Maintenance
Install the filter in the water supply line before the pressure washer inlet, ensuring the connections are secure and correctly sealed.
Inspect the clear bowl regularly and clean the stainless steel mesh element when contamination becomes visible. A heavily blocked filter can restrict inlet flow, so the element should be kept clean to maintain an adequate water supply to the pressure washer.
Important: Always ensure the pressure washer receives the minimum water flow required by the manufacturer. This filter is intended to remove particulate contamination and does not make unsuitable or chemically contaminated water safe for use in a pressure washer.