This stainless steel 240 volt self priming submersible centrifugal pump includes a integral float switch. These pumps are ideal for farming, fisheries or residential pumping, plus many more applications.
This submersible water transfer pump is constructed with a stainless steel pump casing and stainless integral float switch ensuring a long operating life. The pump includes an italian made silicon carbide mechanical seal and stainless steel shaft ensuring reliable operation. This pumps is suitable for fresh or limited use in saline water.
As the float switch for these pumps is integrated inside an enclosure they are ideal for pits and tight holes where traditional float switches don't work. Other pumps will jam their floats in the on position causing the pump to suck the pit dry and overheat the motor leading to failure. These units avoid this and are unique for this reason.
Another great advantage to these pumps is the ability to pump water down to depths of only 45mm. The pump will turn on when water levels reach 125mm but will continue to draw down the level to the 45mm 'off' switch point. This makes a massive difference when you're trying to pump a basement or flooded area dry.
Popular uses include water supply and disposal, irrigation, dairy, farming, fishery, residential pumping and construction sites.
|Voltage||240V Single Phase|
|Motor||Continuous Duty Cycle|
|Flow Rate||95 L/min, 5.7m3/hr|
|Inlet / Outlet||1.5"|
|Pressure||7m ~70kpag, 10psig|
Turns on at ~125mm
Off at ~45mm
|Max. Fluid temp.||60 C|
Water, Sea Water, Salt Water
(Note; whilst the pump is predominantly of stainless steel construction it is not recommended it be installed in sea water for continuous submersion installations).
|Approx. Weight||5.1 Kg|
|Approx Dimensions||20.5 x 15 x 26 cm|
Grade 304 Stainless steel pump casing
Stainless steel impeller
Stainless steel shaft
Stainless steel motor
Silicone Carbide Mechanical Shaft Seal with secondary oil seal