Paddock™ Pressure Washer Snow Foam Cannon – 1L, 4000 PSI
Description
The Paddock™ Snow Foam Generator is a pressure washer foam cannon designed to apply a thick layer of detergent or compatible cleaning solution. Pre-soaking helps loosen dirt, grease and grime, making subsequent cleaning easier and reducing the need for aggressive direct pressure washing.
Featuring a 1L detergent bottle, adjustable spray pattern and a 1/4" quick-connect plug, this foam cannon is suitable for compatible pressure washers operating at up to 4,000psi / 275bar and 14L/min.
Paddock™ Pressure Washer Snow Foam Generator
Pre-soaking vehicles, machinery and equipment with detergent or snow foam helps soften built-up dirt before pressure washing. This can make stubborn contamination easier to remove while reducing the amount of concentrated pressure required during the main wash.
The Paddock foam cannon connects to the end of a compatible pressure washer gun or lance and uses the high-pressure water flow to draw cleaning solution from the bottle and generate foam.
Snow Foam Generator Features
- Maximum pressure: 4,000psi / 275bar
- Maximum flow: 14L/min
- 1L detergent bottle
- 1/4" quick-connect plug inlet
- Maximum stated temperature of 60°C
- Produces clinging foam for pre-soaking
- Adjustable spray pattern
- Applies detergent downstream of the pressure washer pump
- Suitable for compatible pressure washers and cleaning solutions
Pre-Soak Before Pressure Washing
Applying a layer of snow foam or detergent before pressure washing gives the cleaning solution time to work on dirt, grease and grime.
This makes the foam generator useful for cleaning:
- Vehicles and 4WDs
- Trucks and trailers
- Construction equipment
- Agricultural machinery
- Workshop equipment
- Plant and machinery
- Suitable exterior surfaces
1L Detergent Bottle
Fill the 1L bottle with a pressure-washer-compatible detergent, snow foam or cleaning solution prepared according to the chemical manufacturer's dilution instructions.
Because the chemical is introduced at the foam cannon, it does not need to pass through the pressure washer pump.
Adjustable Foam Spray
The spray pattern can be adjusted to suit the cleaning application, allowing the operator to alter the foam coverage across the surface being treated.
Foam thickness and coverage will vary depending on the detergent, dilution ratio, water supply and pressure washer flow and pressure.
Specifications
| Specification | SPWFGU |
|---|---|
| Product Type | Pressure washer snow foam generator / foam cannon |
| Maximum Pressure | 4,000psi / 275bar |
| Maximum Flow | 14L/min |
| Maximum Temperature | 60°C |
| Inlet Connection | 1/4" quick-connect plug |
| Bottle Capacity | 1L |
| Spray Pattern | Adjustable |
Pressure Washer Compatibility
The foam cannon is supplied with a 1/4" quick-connect plug. Pressure washers using another connection type may require an appropriate adaptor.
Scintex stocks a range of pressure washer fittings and adaptors for connecting accessories to compatible pressure washers, including selected Karcher, Gerni, Bosch and other systems.
Cleaning Solution Compatibility
Use detergents and cleaning solutions suitable for pressure washer foam cannon applications. Check chemical compatibility before using degreasers or other specialist cleaning products, particularly concentrated or aggressive chemicals.
Always follow the chemical manufacturer's dilution, handling and surface-compatibility instructions. Test on an inconspicuous area where appropriate and do not allow cleaning products to dry on the surface unless specifically directed by the chemical manufacturer.