Skip to content
Order online or call 1300 246 406
Order online or call 1300 246 406

Electric Drive Gear Pumps

$2,185.20
(inc GST)
SKU KC13E0.75-1

Notify me when back in stock

Heavy & Bulky Item Information Info

Freight costs for heavy & bulky items may differ to the online freight calculator. Some items require a drop tail delivery service where a fork lift is not available to unload.

To order, checkout online and a customer service representative will then contact you to discuss the delivery options.

You can also contact us for a freight quote prior to ordering.

For orders outside of Australia contact us for a quote.
Scintex can ship worldwide.

 

Description

Complete electric drive and pump unit. Please note these are assembled on demand and we recommend contacting us for a price and availability before ordering.

Pump application:

These positive displacement low inertia pumps are excellent at pumping fluids at low to medium pressures. These pumps can be used to pump water and a large range of other non abrasive fluids including oils. Very useful for pressure boosting, liquid transfer, factory process pumping and lubrication duties.

Pump Applications include

  • Tallow’s
  • Transformers oils
  • Heating oils
  • Printers ink
  • Bitumen emulsions
  • Molasses-see Tech Data sheet POS-9 for details
  • Jelly products
  • Fertilizer
  • Diesel
  • Kerosene
  • Lubricating liquids
Pump Model

Inlet/Outlet (")

Voltage Power (Hp)

Speed (RPM)

KC13E0.75-1 1/2 240 0.75 435
KC20E0.75-1 3/4 240 0.75 480
KC25E1-1  1 240  450 
KC25E1-3  1 415   450 
KC25E3-1  1 240  360 
KC253-3  1 415  360 
KC25E3-3A  1 415 360 
KC35E2-1  1 1/4 240  400 
KC35E2-3  1 1/4  415  400
KC35E10-3  1 1/4  415  10  420
KC50E4-3  415 395 
KC50E10-3  415  10  420 
KC80E7-3  415  7.5 420 
KC80E10-3  415  10  420 

*240V Motor are single phase, 415V Motors are 3 Phase

*Note Motors are supplied without a plug or lead fitted

Performance:

Performance curves are based on a kinematic viscosity of 1mm²/s and a density of 1000Kg/m³ at 20ºC.

  • Flow rates up to 27 m³/h
  • Heads up to 30m
  • Fluids must be clean and free from suspended abrasive particles
  • Maximum fluid temperature: +60ºC.
  • Maximum ambient temperature: +60ºC.
  • Rotational speed: Nominal 400rpm with a 600rpm recommended maximum.

For liquids with high viscosity, i.e. molasses the recommended speed is 200rpm.

Datasheets

Standard Gear Pump Models

  • Comes in six pump different sizes with 12 electric motor and 20 engine combinations.
  • Lubrication: Blind plain bearings are self lubrication with the pumped liquid; the stuffing box has a gland packing to serve as grease lubricated bearing.
  • Pumps can be run in reverse to change the direction of the pumped fluid.

Installation:

Securely bolt pump unit in location. The gear pump can be installed in any orientation except for engine driven units which must be installed in a horizontal position. However always ensure that pump is running in the right direction. Gear pumps can run in either direction by operating the power unit in reverse or alternatively by changing the delivery and suction pipes to opposite sides of the pump. If closed heads are to be encountered than a pressure relief or bypass valve must be installed and set to the required pressure. If full bypass is required ensure that vee belts are correctly aligned with the correct tension. Always prime the pump with the fluid to be pumped and start with a fully open discharge before throttling to pressure requirements.

Caution: Pumps will self-lubricate using the pumped fluid however avoid running the pump dry as this will create rapid wear.

*Prices subject to change without notice.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
N
Ned
Molasses Pump

Good units and work well with molasses. A bit of delay on making it up but worth it. Advice was clear and the staff pleasant.

N
Ned
Molasses Pump

Good units and work well with molasses. A bit of delay on making it up but worth it. Advice was clear and the staff pleasant.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
N
Ned
Molasses Pump

Good units and work well with molasses. A bit of delay on making it up but worth it. Advice was clear and the staff pleasant.

N
Ned
Molasses Pump

Good units and work well with molasses. A bit of delay on making it up but worth it. Advice was clear and the staff pleasant.