4.6ft Galvanised Tractor Slashers
Heavy duty, built for Australian conditions
Galvanised steel deck
Adjustable mowing height
Step down blades
Top link chains - great for uneven ground
PTO safety guard and front/rear stone guards
Includes PTO Shaft, PTO Safety Slip Clutch and rear trailing wheel
Note: Photo shows 6ft model with dual rear trailing wheels. The 4.6ft model is the same high quality but with a single trailing wheel.
All spare parts and technical support are available through our location in Brisbane.
This is a highly versatile tractor slasher lending itself to many applications. Scintex has supplied this unit for use in many mowing applications from mine sites, golf courses, home yards, acreages to equine centers, parklands, schools, camping grounds, caravan parks and roadsides. This unit is a genuine 4.6ft size which is ideal and larger then other units often on offer.
The mow height has adjustable positions which are changed by varying the height of the side skids. Top link chains allow the slasher to float over undulating and uneven ground giving a better cut and reduced blade wear. Front and rear chain, stone deflectors provide good protection from flying rocks and sticks.
These units run a upgraded heavy duty gearbox making them suitable for a wider range of tractor hp ratings. Specifying a heavier duty gearbox ensures users will never have any issues operating in the harsh Australian terrrain.
The PTO gearbox is is guarded for safety. It is still easy to access the gearbox for maintenance and oiling. Cat I&II pins, PTO shaft and PTO Clutch are included with the slasher. The twin blades are simple to change and spares are readily available through Scintex and other mower or tractor stores.
Included is a rear trailing wheel. These wheels make the units ideal for use in rough terrain or by inexperienced operators.
These are fully optioned slashers built with heavy duty high end components ideal for the Australian conditions. Don't compromise on quality.
PTO Slasher Specifications
||4.6 FT Slasher
|Cutting Width (mm)
|Cutting Height (mm)
|Deck Thickness (mm)
|Tractor Power (hp)
||ideal for 45-75hp
|3 Point Linkage
||Cat I or II
||1510 x 1820 x 970
||1-3/8" 6 Spline
|PTO Shaft Clutch
|Rear Trailing Wheel
Note: Requires greasing of grease nipples and addition of gearbox oil prior to operation. To reduce the storage and shipping size the mower will require some simple assembly before use.
Includes PTO shaft with safety slip clutch
This item can be shipped Australia wide and is also available for pick up from our Brisbane warehouse. These mowers have a shipping weight of over 200kg so please contact us for a freight quote to your location prior to ordering. A fork lift will be required at the receiver's location for unloading otherwise a tail lift truck can be used or depot collection organised.